801 ROLLER

Beds:

• Box channel 12-gauge galvanized x 6” deep with 1” flange.

• Beds are bolted together using 11/16” hex tube and 7/16” spanner rod.

• All beds have bolted guardrail tube crossmembers and return rollers.

• A standard bed is 6 ½” wider than the belt.

• Allow 2 inches per side for hardware bolted to the frame.

Carrier Rollers:

• Rollers are 1.9” diameter x 16-gauge steel with ball bearings and 7/16” hex axles.

• Axles are spring loaded for easy assembly or removal.

• The top of roller is located 1/8” above the top of conveyor bed.

• Carrier rollers are available on 3”, 6”, 9” or 12” Centers.

Drive Pulleys:

• Standard Drive pulleys come in 6”, 9” or 12” diameter crowned and lagged.

• Drive pulley shafts come in 1 3/16” diameter, 1 7/16” diameter or 1 15/16” diameter.

End Pulleys and Take-up Pulleys:

• 4” diameter crowned with 1 3/16: dia. shaft.

• Internal mounted bearings are standard.

Drive Snubber Roller:

• Rollers are 2 ½” diameter 11-gauge steel with ball bearings, 11/16” hex tube spanner and 7/16” diameter shaft.

Belt return Idler Rollers:

• Rollers are 1.9” diameter x 16-gauge steel with ball bearings and 7/16” hex axles.

• Axles are spring loaded for easy assembly or removal.

Belt Speed:

• 60 Feet Per Minute (FPM) is the most common.

• Other speeds and variable speeds are available as options.