480 SERIES

Rollers:

• 2 1/2” dia. x 11-gauge electric welded tube with 11/16” hex bore flanged ball bearings with Hardened steel raceways, cones and balls outer Teflon seal and inner shield.

• Load rating per roller is 650 lbs.

• Standard Roller Centers’ are 4 1/2”, 6” and 6/6.

• 6/6 Rollers are on 3” Centers with every other roller driven.

Sprockets:

• Two #60A15 tooth sprockets are welded to the tube at the drive end.

Axles:

• Roller axles are 11/16” hex stock spring loaded for easy removal and assembly.

• The roller mounting location is 5/16” above the top flange of the idler side frame.

Frame:

• Idler side is 4” high x 5.4# structural steel channel.

• Drive side is 6” high x 8.2# structural steel channel.

• 10-gauge steel top and bottom scalloped guard (optional 7ga).

Crossmembers: 3” x 4.1# structural channel.

Frame capacity: 6,000 lbs. with supports on 10’-0” centers.

15,000 lbs. with supports on 5’-0” centers.

Finish: Standard finish for painted components is Metzgar Medium Blue or Vista Green.